{"id":800,"date":"2026-09-08T05:55:17","date_gmt":"2026-09-08T05:55:17","guid":{"rendered":"https:\/\/plastic-conveyor-belt.com\/product\/5935-grid-straight-run-belt\/"},"modified":"2026-09-08T09:01:32","modified_gmt":"2026-09-08T09:01:32","slug":"5935-grid-straight-run-belt","status":"publish","type":"product","link":"https:\/\/plastic-conveyor-belt.com\/pt\/produto\/5935-grid-straight-run-belt\/","title":{"rendered":"5935 Series Grid Straight Run Belt"},"content":{"rendered":"
\n

Product overview<\/h2>\n

5935 Series Grid Straight Run Belt is presented as an industrial conveyor component for OEM, replacement and line-development work. This page keeps the series identity and available technical data together, then explains the surrounding interfaces that determine whether a replacement or new installation will fit and run correctly.<\/p>\n

A plastic modular conveyor is a positive-drive system. The belt or chain should be selected as part of a complete mechanical interface that includes the conveyed product, support surface, shaft arrangement, sprocket position, return path, guides, transfers, temperature, cleaning regime, and accumulation behavior. A small geometric mismatch can alter articulation or tooth engagement, so purchasing decisions should be based on measured interfaces rather than visual similarity alone. For replacement work, the most useful starting information is the existing belt or chain identification, pitch, assembled width, hinge or rod arrangement, edge profile, sprocket tooth count, sprocket bore, shaft size, and clear photographs of the drive and return ends. When a legacy marking is unreadable, a dimensioned sketch and several perpendicular photographs are more reliable than one perspective image.<\/p>\n<\/section>\n

\n
\n

Structure and interface<\/h2>\n

Straight-running and radius systems impose different geometric demands. Straight-running modules articulate around sprockets in the travel direction, while a radius or side-flexing design must also accommodate lateral articulation through a controlled curve. A straight belt should never be forced through a curve simply because its width fits the frame.<\/p>\n

Check the hinge line, edge geometry, underside drive features and any retention elements against the existing system. Do not identify the product from color alone.<\/p>\n<\/div>\n

\"5935<\/figure><\/div>\n<\/section>\n
\n

Technical specifications<\/h2>\n

Use the series-specific values below when checking fit, operating conditions and drive compatibility. Confirm project conditions before release.<\/p>\n

\"5935<\/figure>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nValue<\/th>\n<\/tr>\n<\/thead>\n
Pitch<\/td>\n19.05 mm<\/td>\n<\/tr>\n
Minimum backflex radius<\/td>\n25 mm<\/td>\n<\/tr>\n
Maximum working load at 21\u00b0C<\/td>\n13,000 N for XLG\/PS; 7,000 N for XP<\/td>\n<\/tr>\n
Working temperature, XLG\/PS<\/td>\n4\u201365 \u00b0C dry\/wet<\/td>\n<\/tr>\n
Working temperature, XP<\/td>\n4\u2013105 \u00b0C dry\/wet<\/td>\n<\/tr>\n
Weight<\/td>\n6.3 kg\/m\u00b2 XLG\/PS; 4.9 kg\/m\u00b2 XP<\/td>\n<\/tr>\n
Mold-part widths<\/td>\n76.2 \/ 152.4 mm<\/td>\n<\/tr>\n
Standard assembly width<\/td>\nW = 76.2 \u00d7 N<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/section>\n
\n

Selection checks<\/h2>\n
\n
Conveyor layout<\/strong><\/p>\n

Confirm straight, radius, incline, accumulation and transfer duty.<\/p>\n<\/article>\n

Dimens\u00f5es<\/strong><\/p>\n

Measure pitch, assembled width, hinge\/rod position and any retention features.<\/p>\n<\/article>\n

Interface de acionamento<\/strong><\/p>\n

Confirm compatible sprocket series, tooth count, bore and shaft.<\/p>\n<\/article>\n

Ambiente<\/strong><\/p>\n

State temperature, wet\/dry duty, cleaning chemistry and special material needs.<\/p>\n<\/article>\n<\/div>\n

O ambiente operacional \u00e9 importante porque os materiais termopl\u00e1sticos reagem de forma diferente \u00e0 temperatura, umidade, produtos qu\u00edmicos, abras\u00e3o e contato deslizante cont\u00ednuo. Os valores das s\u00e9ries publicadas devem ser usados \u200b\u200bem conjunto com seus respectivos c\u00f3digos de material e faixas de temperatura. Um material n\u00e3o deve ser substitu\u00eddo apenas por ter uma cor semelhante; a cor n\u00e3o \u00e9 um m\u00e9todo suficiente para identifica\u00e7\u00e3o de materiais.<\/p>\n<\/section>\n

\n
\n

Application planning<\/h2>\n

The series must be reviewed with product footprint, load, stability, speed, transfer sensitivity, accumulation and cleaning access. For curves, the side-flexing geometry and guide path become part of the selection. For straight conveyors, support and drive alignment remain equally important.<\/p>\n

As transfer\u00eancias merecem a mesma aten\u00e7\u00e3o de engenharia que o longo v\u00e3o da esteira transportadora. Produtos pequenos ou inst\u00e1veis \u200b\u200bpodem necessitar de uma placa de pente, ponte de rolos, arranjo de nariz ou geometria de placa fixa controlada. O objetivo n\u00e3o \u00e9 apenas uma pequena folga vis\u00edvel; a interface deve suportar o produto e evitar interfer\u00eancias entre os m\u00f3dulos m\u00f3veis e as partes estacion\u00e1rias.<\/p>\n<\/div>\n

\"5935<\/figure><\/div>\n<\/section>\n
\n

Drive and sprocket matching<\/h2>\n

Sprockets provide the positive-drive relationship. Tooth count, pitch diameter, bore, hub or split construction, shaft keying, and axial location should be reviewed together. Poor alignment can concentrate load on only part of the belt width, while an inappropriate fixing arrangement can interfere with thermal movement.<\/p>\n

<\/section>\n

\n

Installation and commissioning<\/h2>\n

Before installation, inspect guides, supports, shafts, sprockets and transfer parts for wear or interference. Fit the belt or chain without forcing joints. Rotate the drive slowly or jog the machine at low speed to confirm clean tooth engagement across the width, stable guide contact and a controlled return path.<\/p>\n

After loading representative product, observe transfers, curves, accumulation zones and any incline. Repeated impact, local lifting, scraping or a change in drive noise usually deserves mechanical investigation before continued production.<\/p>\n<\/section>\n

\n

Inspection and maintenance<\/h2>\n

Maintenance is most effective when it is inspection-led. Operators should monitor hinge areas, rods, guide contact, sprocket engagement, unusual noise, local wear, product buildup, and any change in the return path. Replacing one worn component without correcting alignment or contamination may only move the problem to another location.<\/p>\n\n

Cleaning or sanitation methods should be compatible with the selected material and with rollers, elastomers, magnets or retention features on the exact series.<\/p>\n<\/section>\n

\n

Prepara\u00e7\u00e3o de RFQ<\/h2>\n

For OEM and retrofit projects, a good RFQ separates confirmed data from open questions. Confirmed dimensions should be listed with units and measurement method. Unknown material, load, speed, or chemical exposure should be marked for confirmation rather than estimated.<\/p>\n