Series / Product
2000 Series Comb Plate
2000 Series Comb Plate for industrial conveying and replacement work, with series-specific dimensions, interface checks and RFQ guidance.
- Material
- POM
- Available variants
- 150 × 152 mm; 190 × 151 mm; 190 × 152 mm
- Listed weights
- 0.08 kg; 0.16 kg; 0.12 kg
For replacement work, send the existing series/model when known plus measured width, pitch and drive-interface details. Unknown values can remain open for confirmation.
Product overview
2000 Series Comb Plate is presented as an industrial conveyor component for OEM, replacement and line-development work. This page keeps the series identity and available technical data together, then explains the surrounding interfaces that determine whether a replacement or new installation will fit and run correctly.
A plastic modular conveyor is a positive-drive system. The belt or chain should be selected as part of a complete mechanical interface that includes the conveyed product, support surface, shaft arrangement, sprocket position, return path, guides, transfers, temperature, cleaning regime, and accumulation behavior. A small geometric mismatch can alter articulation or tooth engagement, so purchasing decisions should be based on measured interfaces rather than visual similarity alone. For replacement work, the most useful starting information is the existing belt or chain identification, pitch, assembled width, hinge or rod arrangement, edge profile, sprocket tooth count, sprocket bore, shaft size, and clear photographs of the drive and return ends. When a legacy marking is unreadable, a dimensioned sketch and several perpendicular photographs are more reliable than one perspective image.
Structure and interface
Los sistemas de correa recta y curva imponen diferentes exigencias geométricas. Los módulos de correa recta se articulan alrededor de las ruedas dentadas en la dirección de desplazamiento, mientras que un diseño de correa curva o de flexión lateral debe permitir también la articulación lateral a través de una curva controlada. Nunca se debe forzar una correa recta a través de una curva simplemente porque su ancho se ajuste al bastidor.
Check the hinge line, edge geometry, underside drive features and any retention elements against the existing system. Do not identify the product from color alone.
Technical specifications
Use the series-specific values below when checking fit, operating conditions and drive compatibility. Confirm project conditions before release.
| Parameter | Value |
|---|---|
| Material | POM |
| Available variants | 150 × 152 mm; 190 × 151 mm; 190 × 152 mm |
| Listed weights | 0.08 kg; 0.16 kg; 0.12 kg |
Selection checks
Confirm straight, radius, incline, accumulation and transfer duty.
Measure pitch, assembled width, hinge/rod position and any retention features.
Confirm compatible sprocket series, tooth count, bore and shaft.
State temperature, wet/dry duty, cleaning chemistry and special material needs.
El entorno operativo es importante porque los materiales termoplásticos responden de manera diferente a la temperatura, la humedad, los productos químicos, la abrasión y el contacto deslizante continuo. Los valores de serie publicados deben utilizarse junto con sus códigos de material y rangos de temperatura indicados. No se debe sustituir un material únicamente por tener un color similar; el color no es un método suficiente para identificar un material.
Application planning
The series must be reviewed with product footprint, load, stability, speed, transfer sensitivity, accumulation and cleaning access. For curves, the side-flexing geometry and guide path become part of the selection. For straight conveyors, support and drive alignment remain equally important.
Las transferencias merecen la misma atención de ingeniería que los tramos largos de la cinta transportadora. Los productos pequeños o inestables pueden requerir una placa de peine, un puente de rodillos, un sistema de soporte o una geometría controlada de la placa fija. El objetivo no es simplemente un pequeño espacio visible; la interfaz debe soportar el producto y evitar interferencias entre los módulos móviles y las piezas fijas.
Drive and sprocket matching
Los piñones proporcionan la transmisión positiva. Se deben revisar conjuntamente el número de dientes, el diámetro primitivo, el diámetro interior, la construcción del cubo o dividida, el chavetero del eje y la posición axial. Una mala alineación puede concentrar la carga solo en una parte del ancho de la correa, mientras que una fijación inadecuada puede interferir con la dilatación térmica.
Installation and commissioning
Before installation, inspect guides, supports, shafts, sprockets and transfer parts for wear or interference. Fit the belt or chain without forcing joints. Rotate the drive slowly or jog the machine at low speed to confirm clean tooth engagement across the width, stable guide contact and a controlled return path.
After loading representative product, observe transfers, curves, accumulation zones and any incline. Repeated impact, local lifting, scraping or a change in drive noise usually deserves mechanical investigation before continued production.
Inspection and maintenance
El mantenimiento es más eficaz cuando se basa en la inspección. Los operarios deben supervisar las zonas de las bisagras, las varillas, el contacto de las guías, el acoplamiento de las ruedas dentadas, los ruidos inusuales, el desgaste localizado, la acumulación de producto y cualquier cambio en la trayectoria de retorno. Sustituir un componente desgastado sin corregir la alineación o la contaminación puede simplemente trasladar el problema a otro lugar.
Cleaning or sanitation methods should be compatible with the selected material and with rollers, elastomers, magnets or retention features on the exact series.
RFQ preparation
Para proyectos OEM y de modernización, una buena solicitud de cotización (RFQ) distingue entre datos confirmados y preguntas sin respuesta. Las dimensiones confirmadas deben indicarse con sus unidades y método de medición. Los materiales, cargas, velocidades o exposiciones químicas desconocidas deben marcarse para su confirmación, en lugar de estimarse.
- Series or existing marking
- Pitch and assembled width
- Overall conveyor layout and curve direction
- Sprocket tooth count, bore and shaft
- Product load, speed, temperature and wet/dry conditions
- Quantity and sample/replacement/OEM status
Preguntas frecuentes
Can a replacement be selected from a photograph alone?
Photos help with identification, but pitch, width, hinge/rod geometry and the drive interface should also be measured.
Do existing sprockets need replacement?
Not always. Check series compatibility, tooth condition, bore/shaft fit and wear before reusing them.
Can material be changed independently of geometry?
Material changes can alter temperature capability, friction and wear. Use the listed options as the starting point and request confirmation for alternatives.
How should non-standard width be requested?
Send the required assembled width and the measured module increment or an existing sample. Width rules differ by series.
What speeds the quotation?
Series, pitch, width, sprocket/shaft data, application, operating conditions, quantity and drawings or clear photos.
Fit and release checks for this series
Use the available series dimensions together with the actual conveyor interfaces. The final release should identify what is confirmed and what still needs measurement.
Confirm plate or bridge mounting, product footprint, adjacent conveyor geometry and moving-part clearance.
Evaluate product support through the complete transfer rather than judging only the visible gap.
Record compatible sprocket or mounting geometry, shaft/bore information and the condition of existing mating components.
State product, load, speed, temperature, moisture, cleaning, accumulation and transfer conditions that apply to this project.
Confirmed series data to carry into the RFQ
Material: POM; Available variants: 150 × 152 mm; 190 × 151 mm; 190 × 152 mm; Listed weights: 0.08 kg; 0.16 kg; 0.12 kg. Use these values only for the exact series shown on this page; any project-specific dimension or alternative material should be confirmed before ordering.
For a replacement, add photographs of the existing top surface, underside, edge/hinge area, drive sprockets and return end. For a new machine, add the conveyor layout and the product path so support, guides and transfers can be reviewed with the selected component.
How to apply the series data on the machine
The listed values define the series, while the conveyor decides whether that series is appropriate for the project.
Machine fit
Treat the transfer as a moving-to-stationary interface. Verify the mounting position, product footprint, moving module clearance and the adjacent conveyor geometry before setting the final gap.
Useful confirmed values on this page include material POM, available variants 150 × 152 mm; 190 × 151 mm; 190 × 152 mm, listed weights 0.08 kg; 0.16 kg; 0.12 kg. Keep the unit and the exact parameter name with the purchasing record so the value is not separated from its meaning.
Inspection focus
Repeated product snagging, impact marks or interference with moving modules usually indicates that the transfer geometry needs correction rather than simply a smaller visible gap.
Before reusing surrounding parts, clean and inspect the mating surfaces and drive elements. Photograph any abnormal wear before disassembly; the wear pattern can help explain why the previous component failed or became unstable.
| Controlar | Revisión práctica |
|---|---|
| Existing machine | Measure the part and the surrounding conveyor independently. Do not assume a worn component still shows the original nominal dimension. |
| New machine | Confirm machine envelope, support, drive, transfer and service access before final series release. |
| Alternative option | If material or configuration may change, state which machine dimensions are fixed and which product variables are flexible. |
| Purchase record | Keep series, width, drive/mounting data, operating conditions and any accepted drawing revision together. |
Commissioning record for 2000 Series Comb Plate
Confirm assembly, belt or chain seating, drive/mounting alignment and clearance to stationary parts. Rotate or jog slowly when the machine permits.
Use representative product and observe the most demanding zone: curve, accumulation, incline, transfer or return support as applicable.
Check for localized wear, new noise, edge contact, rod movement, product marks or debris concentration. Record the location of any abnormality.
Keep the final series, installed width, mating component data and operating condition with the maintenance record for future replacement.
Additional series data carried on this page includes Material: POM; Available variants: 150 × 152 mm; 190 × 151 mm; 190 × 152 mm; Listed weights: 0.08 kg; 0.16 kg; 0.12 kg. Do not detach these values from the exact series or configuration when preparing a purchase description. If the machine requires a different width, material, mounting or drive arrangement, flag the change for confirmation rather than treating it as an automatic option.
Request a series-level quotation
Send the series/model when known, measured dimensions, drive or mounting data, operating conditions, quantity and drawings or photographs. Open points can remain explicit until confirmed.
